Item No: 14.910.0.0309.0
Lathe Model: LB35III, LU35II
Bar Size: 2.00″
Reversible (Main/Sub): No
Coolant: Ext./Int.
LB35III/LB45III & LU35II/LU45II Tools
Manufacturer: Okuma
Model: LB35III/LB45III & LU35II/LU45II
Velocity Products has the largest inventory of tooling, Only for Okuma, in North America.
All Velocity live tools are greased for life, run-in at the factory, pressure tested, CMM inspected, and serialized inspection reports kept on file. Velocity Tooling for Okuma uses oversize output bearings, and spiral bevel gears are machined in matched sets, then lapped in matched sets.
• STP & STL files are available online.
• All Velocity tools are covered by a three year warranty.
Velocity LB35III/LB45III and LU35II/LU45II L-Turret tools are in stock at our facility in Huntsville, AL.
Boring Bar Holders
Item No: 14.910.0.0312.0
Lathe Model: LB45III, LU45II
Bar Size: 2.50″
Reversible (Main/Sub): No
Coolant: Ext./Int.
OD-I Length Turning Holders
Item No: 14.910.0.0310.0
Lathe Model: LB35III, LU35II
Stick Size: 1.00″
Reversible (Main/Sub): No
Coolant: External
Item No: 14.910.0.0313.0
Lathe Model: LB45III, LU45II
Stick Size: 1.25″
Reversible (Main/Sub): No
Coolant: External
OD-II Face Turning Holders
Item No: 14.910.0.0311.0
Lathe Model: LB35III, LU35II
Stick Size: 1.00″
Reversible (Main/Sub): No
Coolant: External
Item No: 14.910.0.0314.0
Lathe Model: LB45III, LU45II
Stick Size: 1.25″
Reversible (Main/Sub): No
Coolant: External